| TEST PERFORMED | RESULTS | DIN |
|---|---|---|
| Dimensions Maximum panel size | 2800 x 1250 [mm], thickness 20/23 [mm] | |
| Dimensional tolerances Dimensions | ±1,20 [mm] ±1,00 [mm] high polish | |
| Specific gravity | Approx. 2,4 [g/cm2] | |
| Weight per m2 with 20mm thickness | Approx. 60,00 [kg] | |
| Bending strength Characteristic value 5% fractile | Approx. >22 [N/mm2] | DIN 52112 |
|
Tearing strength attachment
point
{anchors attached to the rear from the firm of Keil, placement depth 13 mm} |
Approx. 3,2 [KN] {average value} | |
| Elasticity module | Approx. 57 [kN/mm_] average value | |
| Hardness (According to Mohs) | 6 | DIN EN 101 |
| Heat expansion 20-100ºC | 7,95 [10-6/K] | DIN EN 103 |
| Heat conductivity at 64ºC | 1,04 [W/m K] | |
| Specific heat capacity Cp | 0,7 [J/g K] | |
| Water absorption | < 0,1 [Ma.-%] | DIN EN 99 |
| Frost resistance | No trials with visible defects | DIN EN 202 |
| Stain resistance | Class 1 | DIN EN 122 |
| Chemical resistance | Class AA | DIN EN 122 |
| Acid resistance | Class AA | DIN EN 122 |
| Caustic resistance | Class A | DIN EN 122 |
| Fire class | Class A | DIN 4102 |
| Surface wear | Class II, 300 revolutions | DIN EN 154 |
| Slip resistance | No test for polished | DIN 51130 |
| Surface area | High polish | |
| Surface properties |
Closed surface, therefore
easy cleaning with all
traditional cleaning agents and solvents |
|
| Edge finish | all panels are supplied with facetted edges | |
| Application / processing | Flooring, Wall Details, Counter and Worktops | |
| Finish |
Bio-Glass ceramics
can be sawn and drilled with water-cooled diamond tools at the construction site |
|
| Environment | Bio-Glass ceramics is 100% recyclable |
| Trade Name: | Bio-Glass® | |
| Date Prepared: | 12/12/2006 | |
| Chemical Name & Family: | N/A | |
| Formula: | 100% Glass | |
| HMIS Hazard Index | Health | 1 |
| Flammability | 0 | |
| Reactivity | 0 | |
| Personal Protection | A |
Bio-Glass does not contain hazardous ingredients
Glass is made of almost 100% crystalline silica in the form of quartz containing 70-72% weight % silicon dioxide.
Bio-Glass consists of 100% recycled glass. Bio-Glass colors depend on recycled components (hollow glass, tableware, and/or factory shards).
Bio-Glass materials are stable.
Sanding, sawing or grinding may result in the release of dust particles which may cause irritation of the eye or nose or, with excessive long term exposure cause lung disease.
SYMPTOMS:
Skin: Dryness, and/or irritation
Inhale: Shortness of Breath or
Irritation of Nose
Eyes: Irritation
FIRST AID:
Skin – wash with soap and water
Inhale – remove to fresh air
Eyes – rinse with fresh water
If any symptoms persist, see a
physician
Bio-Glass materials are
non-reactive.
When burned, no known hazardous
by-products are emitted.
Not considered hazardous waste.
Wear NIOSH approved HEPA respirators and safety glasses when sanding, sawing or grinding the material. Ventilation is required in confined areas where large amounts of dust will accumulate. Dust Control Equipment recommended.
Disclaimer: The data herein presented is made available solely for the consideration of the recipients and does not constitute a representative or warranty for which Coverings ETC assumes responsibility. It is the responsibility of the recipient to remain informed on Chemical Hazard Information and to design its own program and to comply with all federal, state and local laws and regulations applicable.